Shiv Electronics manufactures dependable, industrial-grade power electronics and electrical systems. From high-capacity 3-phase lift backup UPS and ARDs to servo stabilizers, SMPS, and custom sheet-metal enclosures — engineered for zero downtime.
Heavy-duty 3 Phase In / 3 Phase Out engineered for regenerative elevator motor loads.
415V ±15% InputPure Sine WaveCCCV Charger110% Overload 8s
OEM CustomizedCustom Enclosure & Sizing
ABOUT SHIV ELECTRONICS
Engineering solutions built for dependable industrial performance.
Shiv Electronics is an established OEM power-electronics manufacturing facility situated in the industrial corridor of Satpur MIDC, Nashik, Maharashtra.
Founded under the technical leadership of Sunil Pagar (Managing Director) and Shivam Pagar (Manager), we specialize in end-to-end design, component assembly, testing, and sheet-metal enclosure fabrication for critical electrical power applications.
DSP-Based Inverter Architecture
Digital Signal Processor control provides precise frequency and low harmonic distortion.
In-House Sheet Metal Fabrication
Precision CNC cutting, bending, and protective powder coating for durable enclosures.
High Overload & Surge Tolerance
Handles initial motor inrush currents up to 300% without nuisance tripping.
Satpur MIDC Direct Support
Immediate access to genuine spare parts, engineering revisions, and factory technicians.
Core Specialization
Power Electronics & Lift Backup
Testing Standards
100% Full-Load Burn-In
Elevator OEM Partnering:
We manufacture custom-dimension backup systems, ARD units, and control enclosures tailored for leading elevator manufacturers, contractors, and real-estate developers.
OUR PRODUCT RANGE
Heavy-Duty Power & Electrical Solutions
Designed, fabricated, and rigorously tested in Satpur MIDC, Nashik. Explore our comprehensive range of power electronics built for industrial stability.
Featured Flagship Solution6 kVA – 100 kVA
Offline UPS for Lift — 3 Phase In / 3 Phase Out
High-performance DSP-controlled IGBT inverter engineered specifically for elevator regenerative braking, severe motor inrush currents, and continuous operation during grid power loss.
415 V AC ± 15% 3-Phase Mains Input, 50 Hz ± 4 Hz
Pure Sine Wave Output (THD < 3% on Linear Load)
Constant Current Constant Voltage (CCCV) Battery Charger
Digital LCD Display with Complete Diagnostic Logging
True double-conversion online UPS providing continuous, clean, and isolated power for mission-critical IT servers, hospital ICUs, and automated manufacturing lines.
Zero Transfer Time (0 ms interruption)
Galvanic Isolation Transformer options
Up to 95% operating efficiency
assets/ard-lift.jpg
Elevator Life Safety
ARD for Lift (Rescue Device)
Automatic Rescue Device (ARD) that intelligently senses grid failure, moves the elevator cab in the lightest load direction to the nearest floor, and opens doors safely.
Fully automatic micro-controller sensing
Preserves cabin lighting and ventilation
Float charging system for long battery life
assets/stabilizer.jpg
Precision Regulation
Industrial Voltage Stabilizer
Servo and static automatic voltage stabilizers built for extreme voltage fluctuations in industrial belts. Protects CNC tooling, chillers, and printing presses.
Balanced & Unbalanced 3-Phase regulation
Tight ±1% voltage accuracy
Fast correction speed up to 35 V/sec
assets/smps.jpg
DC Conversion
Switched Mode Power Supply (SMPS)
High-efficiency, compact AC-to-DC power supplies engineered for industrial automation panels, PLC controllers, sensors, and telecom cabinets.
12V, 24V, and 48V DC outputs
DIN-rail & chassis mount chassis
Overload & short circuit auto-recovery
assets/battery-charger.jpg
CCCV Charging
Industrial Battery Charger
Heavy-duty Constant Current Constant Voltage (CCCV) battery charging systems for tubular, lead-acid, and SMF battery banks in substations and backup systems.
24V to 360V DC multi-voltage configurations
Auto Boost and Float charging modes
Reverse polarity & overcharge protection
assets/energy-saver.jpg
Power Quality
Industrial Energy Saver
Engineered power factor correction and energy optimization units that reduce maximum demand penalties, lower harmonic losses, and optimize utility billing.
Power factor target maintained near 0.99
Microcontroller automatic step control
Harmonic attenuation filtering
assets/dc-power-supply.jpg
Stable DC
Regulated DC Power Supply
Precision-regulated linear and SMPS DC power sources designed for test benches, R&D laboratories, burn-in racks, and electronic production environments.
Line & load regulation < 0.05%
Ultra-low ripple and electrical noise
Dual digital meters for Volts and Amps
assets/sheet-metal-fab.jpg
In-House Manufacturing
Sheet Metal Fabrication & Enclosures
Custom control cabinets, battery racks, and UPS enclosures fabricated using CNC laser cutting, press-brake bending, and durable anti-corrosion powder coating.
Manufactured in accordance with Shiv Electronics engineering design benchmarks. Engineered with DSP-based IGBT technology, Pure Sine Wave output, and CCCV battery charging for 6 kVA through 100 kVA elevator backup installations.
Input: 415 V AC ± 15% (3-Phase)
Output: 400 / 415 V AC Pure Sine Wave
Efficiency Up to 95%
Continuous Duty Cycle
Formatted for engineering approvals
Select Rating to Inspect Specifications (6 kVA – 100 kVA):
Swipe horizontally to choose rating
Rating Selected
15 kVA
DC Bus Voltage
180 V DC (15 Batt)
Typical Lift Motor
Up to 12.5 HP (9.3 kW)
Passenger Capacity
10 – 13 Passengers
Specification Parameter
6 kVA
8 kVA
10 kVA
15 kVA
20 kVA
30 kVA
40 kVA
50 kVA
60 kVA
75 kVA
100 kVA
DC Bus Voltage
72 V
96 V
144 V
180 V
240 V
360 V
360 V
360 V
360 V
360 V
360 V
Battery Bank (12V Units)
6 Nos.
8 Nos.
12 Nos.
15 Nos.
20 Nos.
30 Nos.
30 Nos.
30 Nos.
30 Nos.
30 Nos.
30 Nos.
Mains Input Voltage
415 V AC ± 15% (3 Phase, 4 Wire)
Input Mains Frequency
50 Hz ± 4 Hz
Battery Charger Architecture
CCCV (Constant Current Constant Voltage type charging algorithm)
Typical Lift Motor Suitability
Up to 5 HP
Up to 7.5 HP
Up to 10 HP
Up to 12.5 HP
Up to 15 HP
Up to 25 HP
Up to 35 HP
Up to 40 HP
Up to 50 HP
Up to 60 HP
Up to 75 HP+
Manual Changeover Provision
Optional
Optional
Provided as Standard Built-in (> 10 kVA)
Inverter Mode Technical Parameters
Technology
DSP based IGBT Technology
Output Voltage
400 / 415 V AC, 3 Phase
Output Frequency
50 Hz ± 0.1 Hz
Output Waveform
Pure Sine Wave
Harmonic Distortion
Less than 3% on Linear Load
Inverter Efficiency
Up to 90% / 92% / 95% (Nominal load)
Power Factor
0.8
Overload Capability
110% for 8 seconds
Crest Factor
3 : 1 (High inrush tolerance)
Audible Noise
Less than 65 dB at 1 Meter
Duty Cycle
Continuous 24x7 Rated
Environmental & Thermal Compliance
Operating Ambient
0°C to 45°C
Relative Humidity
Max 95% non-condensing
Cooling System
Forced Air Cooling with high-velocity industrial fans
Enclosure Material
Heavy-gauge CRCA sheet metal with powder coating
Cable Termination
Heavy-duty terminal blocks with safety shroud
Grid Compatibility
Suitable for unstable Indian grid and DG set synchrony
8-Point Comprehensive Safety & Protection Suite
Output Under & Over VoltageGuards elevator control boards and motors from dangerous voltage swings.
Short-Circuit ProtectionInstant electronic and fuse-based isolation to prevent semiconductor damage.
Input Under & Over VoltageSeamlessly switches between mains conditioning and battery backup safely.
Over Temperature CutoffThermal sensors trip the system if internal heatsinks exceed safe operating limits.
Output Overload ProtectionAllows 110% overload for 8 seconds to support elevator motor startup.
DC Under & Over VoltagePrevents deep battery discharge and high charging terminal voltage stress.
Phase Reverse ProtectionEnsures correct 3-phase rotational sequence for elevator traction motors.
Surge & Spike SuppressionAbsorbs lightning-induced voltage surges and industrial inductive spikes.
Digital LCD Display Readout
Display Type
Digital Multi-Parameter LCD Display
Input Monitoring
Mains R-Y-B Line Voltages and Frequency
Output Monitoring
Output R-Y-B Phase Voltages and Current Draw
Battery Metrics
Real-time DC Battery Voltage and Charge Status
Load Factor
Percentage Load Capacity Utilization (%)
Fault Diagnostics
Direct error codes for overload, phase imbalance, thermal trip
Indications, Alarms & Changeover
Mains OnLED Indication
Inverter OnLED Indication
Battery LowLED & Audible Buzzer Alarm
Fault StatusLED & Audible Buzzer Alarm
Overload AlertLED & Audible Buzzer Alarm
Over TemperatureLCD Alert & Intermittent Buzzer
Changeover Capability: Manual changeover switch is optional for 6 kVA and 8 kVA models; provided built-in as standard for all models above 10 kVA.
OUR PRODUCTION WORKFLOW
Built with an In-House Manufacturing Mindset
From raw sheet metal and PCB assembly to final load testing in Satpur MIDC, our 4-stage engineering pipeline ensures zero compromise on quality.
01
Engineering Sizing & Design
We evaluate your elevator motor ratings, starting peak currents, and building backup duration to specify the exact kVA and battery DC bus.
02
CNC Sheet Metal & Enclosure
In-house CNC laser cutting, bending, and 7-tank powder-coating fabricate rugged cabinets dimensioned precisely for elevator machine rooms.
03
DSP & IGBT Assembly
Advanced digital signal processors, heavy-duty IGBT switches, copper wound isolation transformers, and CCCV battery chargers are integrated.
04
Full-Load Testing & Dispatch
Every unit undergoes continuous 100% full-load burn-in, inductive surge simulation, and safety trip calibration before factory dispatch.
APPLICATIONS
Serving Critical Electrical Sectors
Our systems provide continuous power protection across high-stake commercial, residential, and industrial facilities throughout Maharashtra and India.
Elevator OEMs & Contractors
Dedicated lift backup inverters, ARDs, and control cabinets customized for lift manufacturers.
Hospitals & Healthcare
Clean sine wave power for diagnostic MRI, CT scans, ICU monitoring, and surgical operation theaters.
IT, Data Centers & Telecom
Zero-transfer double conversion online UPS systems protecting sensitive network servers and switches.
CNC & Manufacturing Plants
Servo voltage regulators and heavy-duty DC power supplies shielding CNC machinery from grid surges.
THE OEM ADVANTAGE
Why Industry Leaders Choose Shiv Electronics
We bridge the gap between heavy-duty electrical engineering and tailored customer support directly from Satpur MIDC, Nashik.
OEM Manufacturing Expertise
Decades of collective experience designing power electronics tailored to withstand harsh Indian electrical grid variations.
Complete 6–100 kVA Portfolio
From residential 4-passenger lifts to high-speed commercial glass towers and heavy freight elevators, we have proven sizing models.
Custom Fabrication & Branding
Custom enclosure dimensions, private label branding, and custom terminal layouts specifically designed for elevator OEMs.
Direct Local MIDC Support
Direct communication with Managing Director Sunil Pagar and Manager Shivam Pagar for fast quote dispatch, technical consults, and spares.
FREQUENT QUESTIONS
Frequently Asked Questions
Answers to common queries regarding our lift backup UPS systems, OEM branding, and technical specifications.
The sizing depends on the lift motor HP/kW rating, passenger capacity (e.g. 6 passenger vs 13 passenger stretcher lift), and motor drive technology (VVVF variable frequency vs direct on-line). For instance, a standard 6-passenger lift with a 5 HP motor pairs seamlessly with our 6 kVA or 8 kVA unit, while high-rise 10–13 passenger lifts typically require 15 kVA to 20 kVA. You can consult our technical team directly at +91 9370796979 for precise load calculations.
An ARD (Automatic Rescue Device) operates strictly as an emergency rescue mechanism: it moves the stranded lift to the nearest landing floor, opens the doors to let passengers exit, and shuts down until power returns. A Lift Offline UPS, on the other hand, provides continuous uninterrupted 3-phase pure sine wave power, allowing the elevator to continue making multiple trips and full regular operation throughout an extended power blackout.
Yes. As a direct manufacturer with in-house CNC sheet metal fabrication and powder coating, we routinely manufacture systems with custom chassis dimensions to fit constrained elevator machine rooms. We also offer private label branding and custom electrical terminations for elevator OEMs and electrical contractor networks.
Our systems support tubular lead-acid, sealed maintenance-free (SMF/VRLA), and custom industrial battery banks. The DC bus voltages range from 72V DC (6 batteries) for 6 kVA models up to 360V DC (30 batteries) for 30 kVA to 100 kVA systems. The built-in Constant Current Constant Voltage (CCCV) charger ensures optimum battery longevity and thermal protection.
Our manufacturing facility is located in Satpur MIDC, Nashik, Maharashtra. You can fill out the inquiry form below, initiate a quick WhatsApp chat with Managing Director Sunil Pagar (+91 9370796979) or Manager Shivam Pagar (+91 8983994913), or email us at shivelectronicsnsk@gmail.com for same-day official proposals.
DIRECT FACTORY CONTACT
Let's discuss your power electronics requirement.
Get in touch with Shiv Electronics for project quotations, OEM partnerships, and customized power backup solutions. We respond promptly with technical data and competitive factory-direct pricing.
Sunil PagarManaging Director • Commercial & OEM Partnerships
Shivam PagarManager • Technical Operations & Production
Manufacturing Plant & Works:Satpur MIDC, Nashik, Maharashtra, India
assets/lift-backup-1.jpeg
